ShoreDocker Boat Ramp Systems

Address: 6549 Harbor Place Prior Lake, MN 55372 Toll-free phone: 1-866-400-9776 Fax: 952-233-5787 Website: www.shoredocker.com Email: sales@roll-n-go.com

ShoreDocker® Boat Ramp Systems provide the professional parts, hardware and instructions needed for do-it-your-selfers to build their own watercraft shore ramps. Simply add pressure-treated lumber. Easy to construct and use, they are an economical alternative for docking your boat or personal watercraft. Imagine the security of storing your boat over dry ground!

The Model SD1200 has a weight capacity of 1200 lbs. (boat motor, fuel and gear). This model is ideal for all personal watercraft, sailboats and small fishing boats. It has six rows of non-marking polyurethane “donut” rollers. It includes an 1100 lb. (dead pull capacity) winch and 50 ft. of galvanized cable with hook.

The Model SD2000 has a weight capacity of 2000 lbs. (boat motor, fuel and gear). The SD2000 is designed for use with larger fishing and motor boats and works well over rocky shorelines and into boat houses. It has four rows of 3 inch wide non-marking polyurethane “wobble” rollers on adjustable tilting axles (4 rollers per row).  It includes a 1600 lb. (dead pull capacity) winch and 50 ft. of galvanized cable with hook.

ShoreDocker® kits provide enough parts to complete a 16 – 20 foot ramp along with tips and suggestions for customizing your ramp. Using their Accesory Roller and Side Brace Kits makes it easy to lengthen the ramps. Metal parts are hot dipped galvanized, aluminum or stainless steel, giving many years of service life.